AMBRO-SOL P301 SPRAY SILICONE SEALANT REMOVER 400ML

AMBRO-SOL P301 SPRAY SILICONE SEALANT REMOVER 400ML

AMBRO-SOL P301 SPRAY SILICONE SEALANT REMOVER 400ML

0243774

Ambrosol

This spray works perfectly with fresh silicone and with hardened silicone. It removes silicone and its residuals without ruining the surface. This is another amazing product included in the Ambro-Sol “Cleaning” line

SILICONE SEALANT REMOVER – Mix of solvents, designed to remove

excess silicone or silicone scraps. The product acts more quickly in the

presence of fresh silicone than it does in the presence of hardened silicone. When large amounts of silicone need to be removed, begin by removing as much silicone as possible. Afterwards, apply the solvent. It

does not corrode or tarnish any surface.

€ 4.79 €11.98/1 l

In stock

Technical Specifications:

Barcode EAN: 8034108890319

Quantity 400 ml

Box / Case 12 Pz.

Aspect Tin-Plate can containing under pressure fluid

Color Light white

Odour Characteristic of solvent

Relative density at 20°C 0,68 ÷ 0,72 g/ml

Flash point Und. 0° C extremely flammable

Pressure at 20°C 4/6 bar

Water solubility insoluble

Solvent solubility Total

Viscosity at 100°C 3,8 cSt (dry residue)

Melting point 52-62°C ( dry residue )

Penetration test <= 30 dmm (25°C) ( dry residue )

Observations Product with gel technology, it doesn’t drip.

SILICONE SEALANT REMOVER – Mix of solvents, designed to remove

excess silicone or silicone scraps. The product acts more quickly in the

does not corrode or tarnish any surface.

Silicone Sealant Remover 400 ml (P301)

HOW TO USE: On Fresh silicone: Shake well before use and spray on the surface from a distance of about 15 cm, leave to act for a few

minutes and then clean with a cloth or scrapping tool.

Hardened silicone: Scrape the biggest section carefully with a blade or putty knife. Shake well before use and spray the surface from a

distance of about 15 cm and leave the product to act for a few minutes. Remove with a rag or scrapping tool Repeat the operation if

necessary.

MODALITY OF STORAGE

Before using: stock the product in a dry location and don’t stock it with a temperature under 0°C and over 45°C, after the use, keep containers closed. In the original

package, the product can be conserved for 24 months (warranty). The product doesn’t expire.

After the first usage: conserve in a fresh and dry location, away from hot spring. Keep out of reach of children.