ALCHIMICA PU-FINISH MATTE 1L

ALCHIMICA PU-FINISH MATTE 1L

0259425

PU-MATTE is a polyurethane-based, one-component varnish. It polymerizes with the humidity of the atmosphere and forms a sealing film with excellent adhesion to almost any type of substrate. It is aliphatic, so it does not yellow from exposure to sunlight. It consists of a pure, elastomeric, hydrophobic, aliphatic, polyurethane resin that provides the product with excellent resistance to weather conditions, chemicals, solar UV radiation, and mechanical and thermal stress.

€ 9.99

In stock

Store	Stock
Superhome Center Nicosia Lakatamia	Out of stock
Superhome Center Paphos	Out of stock
Superhome Center Nicosia Engomi	Out of stock
Superhome Center Nicosia Strovolos	Out of stock
Superhome Center Limassol	Out of stock

APPLICATIONS

• For stone, porous marble and mosaic impregnation • For a satin effect on other aliphatic varnishes, such as HYPERDESMO®-T

LIMITATIONS

Not recommended for:

• Surfaces with low cohesion

• Coloring, has limited coverage due to low viscosity.

• Applications where thick layers are required.

ADVANTAGES

• Satin effect

• Impregnates any surface, even with low porosity, such as marble and mosaic.

• It polymerizes very quickly so it does not collect dust.

• Strong and uniform adhesion to almost any type of substrate

• Excellent resistance to high temperatures and ultraviolet/UV radiation, does not yellow, does not peel, does not soften up to 80oC. Maximum temperature (shock): 200 oC.

• Excellent resistance to all kinds of weather conditions, maintains its elasticity up to -40 oC.

• Excellent resistance to chemicals and mechanical stresses (high tensile strength and high abrasion resistance).

METHOD OF APPLICATION

Cleaning the surface of loose materials, dust, plant organisms, salts, oils, etc. Loose materials must be smoothed and removed with the appropriate tools.

Stirring: When stirring it is very important not to introduce air into the mixture as it can create bubbles in the final film.

Application: Apply with a brush in one or two layers. Leave 6-24 hours between the two.